MOC 10508A – Planning, Deploying, and Managing Microsoft Exchange 2010 Unified Messaging

MOC 10508A - Planning, Deploying, and Managing Microsoft Exchange 2010 Unified Messaging

COURSE OUTLINE:

Description This course provides information on planning and managing Microsoft Exchange Server 2010 Unified Messaging (UM) deployments. The course addresses such topics as new features, upgrading from Microsoft Exchange Server 2007 UM to Exchange Server 2010 UM, Microsoft Office Communications Server 2007 integration, and tools and processes to support Unified Messaging planning, installation/setup, and implementation.

Prerequisites
To benefit from this course, students must have:

A thorough understanding of Exchange Server 2007 Unified Messaging features and functionality.

An understanding of how to install and setup the Exchange Server 2010 Unified Messaging role

General familiarity with Office Communications Server 2007 R2.

Course Outline

Module 1: Overview of Exchange Server 2010 Unified Messaging

This module provides an introduction to new features introduced in the Exchange Server 2010 Unified Messaging service, with particular attention to the new Arbitration Mailbox feature and improved name resolution.

Lessons

Lesson 1: Introduction to Exchange Server 2010 Unified Messaging

Lesson 2: Overview of Changes to Unified Messaging in Exchange Server 2010

Lesson 3: Arbitration Mailbox

Lesson 4: Improved Name Resolution

After completing this module, students will be able to:

Describe the new and enhanced UM features in Exchange Server 2010.

Explain the benefits of these new features.

Describe the purpose of the new Arbitration Mailbox feature in Exchange Server 2010.

Explain how name resolution has been improved in Exchange Server 2010.

Module 2: Exchange Server 2010 Unified Messaging Architecture

This module describes the overall Exchange Server 2010 architecture and the role of the Unified Messaging system within this architecture. The module also describes how to plan your UM server implementation to ensure that your capacity and availability needs are met, and explains how Cisco Call Manager can be integrated with Exchange Server 2010 UM.

Lessons

Lesson 1: Exchange Server 2010 Unified Messaging Server Topologies

Lesson 2: Exchange Server 2010 Unified Messaging Logical Design

Lesson 3: Exchange Server 2010 Unified Messaging Server Capacity Planning

Lesson 4: Exchange Server 2010 Unified Messaging Availability

Lesson 5: VoIP Gateway Capacity Planning and Ports Calculation

Lesson 6: Exchange Server 2010 Unified Messaging Audio Codecs

After completing this module, students will be able to:

Explain the role of the Unified Messaging server in the overall Exchange Server 2010 architecture.

Describe the various UM server topologies that can be deployed.

Plan your UM server implementation to meet your capacity needs.

Plan your UM server implementation to meet your availability needs.

Explain the role of audio codecs in an Exchange Server 2010 Unified Messaging solution.

Describe key components of the Exchange Server 2010 Unified Messaging logical design.

Module 3: Exchange Server 2010 Unified Messaging Setup and Language Support

This module explains the changes in Unified Messaging server Setup in Exchange Server 2010. You will also learn about the extended Unified Messaging internationalization introduced in Exchange Server 2010, as well as changes in language support between Exchange Server 2007 and Exchange Server 2010 Unified Messaging.

Lessons

Lesson 1 Changes in Exchange Server 2010 Unified Messaging Setup

Lesson 2: Installing the Exchange Server 2010 Unified Messaging Server Role

Lesson 3: Internationalization

Lab : Installing a Language Pack

Exercise 1: Install a Language Pack

Lab : Removing a Language Pack

Exercise 1: Remove a Language Pack

After completing this module, students will be able to:

Describe changes to UM server setup in Exchange Server 2010.

Explain what has changed in language support between Exchange Server 2007 and Exchange Server 2010 Unified Messaging.

Install and remove additional language packs.

Describe the impact of removing a language pack that is currently being used by a dial plan.

Troubleshoot basic language packâ€“related issues.

Module 4: Upgrading Exchange Server 2007 to Exchange Server 2010 Unified Messaging

This module explains the different scenarios for upgrading from an existing Exchange Server 2007 Unified Messaging environment to an Exchange Server 2010 Unified Messaging environment. The module explains what types of environments are supported, and how calls will be routed in the new mixed environment.

Lessons

Lesson 1: Upgrade Requirements and Scenarios

Lesson 2: Adding an Exchange Server 2010 UM Server to an Existing Exchange Server 2007 UM Environment

Lesson 3: Call Flow After Introducing an Exchange Server 2010 Unified Messaging Server

Lesson 4: Migration Issues

Lab : Exploring Exchange Server 2007 Unified Messaging Objects Before and After Upgrade

Exercise 1: Examine Existing Exchange Server 2007 Unified Messaging Objects

Exercise 2: Upgrade Existing Exchange Server 2007 Unified Messaging Objects to Exchange Server 2010

Lab : Examining Network Trace for Different Call-routing Scenarios

Exercise 1: Examine a Simple Voice Mail Call to an Exchange Server 2010 Mailbox

Exercise 2: Examine a Voice Mail Call to an Exchange Server 2007 Mailbox

After completing this module, students will be able to:

Describe the requirements for upgrading Exchange Server 2007 Unified Messaging to Exchange Server 2010 Unified Messaging.

Add an Exchange Server 2010 UM server to an existing Exchange Server 2007 UM environment.

Explain different call-flow scenarios after introducing an Exchange Server 2010 UM server and how to troubleshoot them.

Module 5: Call Answering Rules

This module explains the new Call Answering Rules feature that is introduced in Exchange Server 2010 Unified Messaging. The module describes how Call Answering Rules work, and explains how to administer, configure, and troubleshoot these rules.

Lessons

Lesson 1: Call Answering Rules Overview

Lesson 2: Administering Call Answering Rules

Lesson 3: Troubleshooting Issues with Call Answering Rules

Lab : Working with Call Answering Rules

Exercise 1: Enable a User for Call Answering Rules

Exercise 2: Create Call Answering Rules

Exercise 3: Trigger Call Answering Rules

Lab : Troubleshooting with MFCMapi

Exercise 1: Remove All Call Answering Rules

After completing this module, students will be able to:

Describe the Call Answering Rules feature and the scenarios that it supports.

Administer Call Answering Rules.

Troubleshoot issues with Call Answering Rules.

Module 6: Voice Mail Preview

This module introduces the new Voice Mail Preview feature in Exchange Server 2010. The module describes how Voice Mail Preview works and how users can administer the various Voice Mail Preview options.

Lessons

Lesson 1: What Is Voice Mail Preview?

Lesson 2: Voice Mail Preview User Administration and Experience

Lab : Verifying Voice Mail Preview Settings

Exercise 1: Check UM Mailbox Policy Settings

Lab : Observing How Voice Mail Preview Works and Fails

Exercise 1: Review a Successfully Sent Voice Mail Mess

Exercise 2: Review a Voice Mail Message That Is over 75 Seconds Long

Exercise 3: Review Voice Mail Preview Text with Incorrect Language Assignment

After completing this module, students will be able to:

Describe the benefits of Voice Mail Preview.

Describe the architecture of Voice Mail Preview.

Enable Voice Mail Preview for users.

Understand common Voice Mail Preview failure scenarios.

Module 7: Protected Voice Mail

This module introduces Protected Voice Mail, a new feature in Exchange Server 2010 Unified Messaging that uses Information Rights Management (IRM) to encrypt the contents of voice messages and specify the operations permitted on them.

Lessons

Lesson 1: Overview of Protected Voice Mail

Lesson 2: Active Directory Rights Management Service

Lesson 3: Supported Protected Voice Mail Operations

Lesson 4: Implementing Protected Voice Mail

Lab : Configuring RMS

Exercise 1: Verify RMS Installation

Exercise 2: Enable and Test the Exchange Server 2010 IRM Configuration

Lab : Configuring Protected Voice Mail

Exercise 1: Enforce Protected Voice Mail for All Unauthenticated Callers

Exercise 2: Allow Protected Voice Mail for Authenticated Callers

After completing this module, students will be able to:

Describe the features and benefits of Protected Voice Mail.

Understand the role of Microsoft Active Directory Rights Management (AD RMS) in Protected Voice Mail.

Describe supported Protected Voice Mail scenarios.

Implement Protected Voice Mail.

Module 8: Message Waiting Indicator

This module presents an overview of the Message Waiting Indicator feature introduced in Exchange Server 2010.

Lessons

Lesson 1: Overview of Message Waiting Indicator

Lesson 2: Configuring Message Waiting Indicator

Lesson 3: Message Waiting Indicator Design and Support Issues

Lab : Verifying Message Waiting Indicator Settings

Exercise 1: Verify Message Waiting Indicator Settings

Lab : Setting Up SMS Text Message Notifications

Exercise 1: Set Up SMS Text Message Notifications

After completing this module, students will be able to:

Explain how the Message Waiting Indicator feature functions in Exchange Server 2010.

Configure Message Waiting Indicator settings.

Understand common Message Waiting Indicator implementation and support considerations.

Module 9: Faxing with Exchange Server 2010 Unified Messaging

This module explains how Exchange Server 2010 Unified Messaging enables users to receive fax messages in their Exchange Server 2010 mailbox.

Lessons

Lesson 1: Overview of Faxing with Exchange Server 2010 Unified Messaging

Lesson 2: Configuring Exchange Server 2010 Unified Messaging Faxing

Lab : Verifying Fax Provisioning

Exercise 1: Enable Faxing in UM Settings

Lab : Changing Fax Configuration

Exercise 1: Enable Inband Fax Detection

After completing this module, students will be able to:

Understand differences in fax functionality between Exchange Server 2007 Unified Messaging and Exchange Server 2010 Unified Messaging.

Describe Unified Messaging fax call flow and its underlying logic.

Administer Unified Messaging fax functionality in Exchange Server 2010.

Module 10: Integrating Office Communications Server 2007 R2 with Exchange Server 2010 Unified Messaging

This module presents common integration scenarios that make Exchange Server 2010 Unified Messaging and Office Communications Server 2007 R2 â€œbetter together.â€

Lessons

Lesson 1: Exchange Server 2010 Unified Messaging and Office Communications Server 2007 R2 Integration

Lesson 2: Exchange Server 2010 Unified Messaging Integration with Office Communications Server 2007 R2 Enterprise Voice

Lesson 3: Office Communications Server 2007 R2 Integration with Outlook Web App

Lab : Integrating Office Communications Server 2007 R2 and the Outlook Web App Chat Feature

Exercise 1: Configure IM and Presence in OWA

After completing this module, students will be able to:

Describe the principal Microsoft Exchange Server 2010 Unified Messagingâ€“Office Communications Server 2007 R2 integration scenarios.

Explain the steps for deploying an integrated Exchange Server 2010â€“Office Communications Server 2007 R2 Enterprise Voice solution.

Describe Office Communications Server 2007 R2 instant messaging (IM) integration with Outlook Web App (OWA).

RELATED COURSES

Technical Training
Microsoft Technical

MOC 20347: Enabling and Managing Office 365

This is a 5-day instructor-led training (ILT) course that targets the needs of IT professionals who take part in evaluating, planning, deploying, and operating Office 365 services, including its identities, dependencies, requirements, and supporting technologies. This course focuses on skills required to set up an Office 365 tenant, including federation with existing user identities, and skills required to sustain an Office 365 tenant and its users.

Technical Training
Microsoft Technical

MOC 20345: Administering Microsoft Exchange Server 2016

This 5-day instructor-led course teaches IT professionals how to administer and support Exchange Server 2016. Students will learn how to install Exchange Server 2016, and how to configure and manage an Exchange Server environment. The course covers how to manage mail recipients and public folders, including how to perform bulk operations using Exchange Management Shell. Students also will learn how to manage client connectivity, message transport and hygiene, how to implement and manage highly available Exchange Server deployments, and how to implement back up and disaster recovery solutions.

The course also teaches students how to maintain and monitor an Exchange Server 2016 deployment. In addition, students will learn how to administer Exchange Online in an Office 365 deployment.

Technical Training
Microsoft Technical

Configuring, Managing, and Troubleshooting Microsoft Exchange Server 2010 Service Pack 2

In this hands-on course, you’ll learn to install, configure, and manage an Exchange Server 2010 messaging environment. You will configure Exchange Server 2010 and learn the guidelines, best practices, and considerations that will help you optimize your Exchange server deployment. You will learn to deploy Exchange Server 2010 servers in various roles, including Mailbox role and Client Access role, and you will learn to manage message transport. You will learn to integrate Exchange Server 2010 into an existing Exchange 2003 or Exchange 2007 environment. You will also be introduced to Exchange Online and its implementations with Office 365.

This course incorporates materials from the Official Microsoft Learning Product 10135: Configuring, Managing, and Troubleshooting Microsoft Exchange Server 2010.

Technical Training
Microsoft Technical

C# Design and Application Patterns

The C# Design and Application Patterns course teaches .NET developers how to apply best practices to their .NET applications. While a thorough understanding of the C# language is key to development success, developers should also understand how to write loosely-coupled code that is based upon proven best practices and patterns. By applying design and application patterns to the development process, more consistent, flexible and maintainable code can be written.

In the C# Design and Application Patterns course developers will learn how to apply several Creational, Structural and Behavioral design patterns to their .NET applications. The course includes real-life analogies for each design pattern to help students thoroughly understand the purpose of a pattern and better understand when and where a pattern can be used. Comparisons between patterns are provided to help students in the pattern selection process. Students will also learn about two key application patterns including MVC and MVVM. Hands-on exercises will re-enforce the principles and provide students with an in-depth understanding of individual design and application pattern pros and cons.